Dark Biene
So, i finally upgraded my Radi :-)
if u can´t remember, take a look here to see why i did that....
ok, this is my new baby:
Up
Down
Side
and btw i cleaned my desktop, because i´m using 2 PC´s and now i´ve got my KVM Switch :-)
Before work @all
That´s my PC - old look
u also can see the old Radi there...
ok....
first, i cleaned the Desk...it was time :-)
and removed the old Monitor/mouse/Keyboard of my Linux-Machine
after some hours, lol
it´s looking like that....
hummm, ....much better than before
the next step was cleaning the Watercooling system
i released the complete water and the Pump i cleaned under clean water
and my dog took a look at me ...
of course, the old radi is now in a very dark room ;-)
the new Black Ice Pro II is modded, of course...
There u can see, that i built 2 place holder, to have a better air flow under the Radi
next step was to combine the Radi and the Case....
i did 3 holes......
2 for the Water and 1 for the Fan
then i filled the complete system with water and i let the pump run some minutes alone to remove the complete air in the system
ok, after half hour it was ready :-)
the system is was now without air....
and i started the system for the first time
now it´s looking like that....
sweet?!
so, the next interessting could be the temps...
with the old radi i got
Idle: 43°C
Load: upto 55°C
with the new Blackice
Idle: 33°C
Load 45°C
it gaves me 10°C less with the new big Radi
very nice i think
btw, i´m using 2x120mm adjustable Fans and they are running at lowest speed
maybe it can be some degrees colde if i pump up the speed
but with these settings i can´t hear the system, almost and that with good temps, i think
so what do u think about that all?
to be countined.....?
if u can´t remember, take a look here to see why i did that....
ok, this is my new baby:
Up
Down
Side
and btw i cleaned my desktop, because i´m using 2 PC´s and now i´ve got my KVM Switch :-)
Before work @all
That´s my PC - old look
u also can see the old Radi there...
ok....
first, i cleaned the Desk...it was time :-)
and removed the old Monitor/mouse/Keyboard of my Linux-Machine
after some hours, lol
it´s looking like that....
hummm, ....much better than before
the next step was cleaning the Watercooling system
i released the complete water and the Pump i cleaned under clean water
and my dog took a look at me ...
of course, the old radi is now in a very dark room ;-)
the new Black Ice Pro II is modded, of course...
There u can see, that i built 2 place holder, to have a better air flow under the Radi
next step was to combine the Radi and the Case....
i did 3 holes......
2 for the Water and 1 for the Fan
then i filled the complete system with water and i let the pump run some minutes alone to remove the complete air in the system
ok, after half hour it was ready :-)
the system is was now without air....
and i started the system for the first time
now it´s looking like that....
sweet?!
so, the next interessting could be the temps...
with the old radi i got
Idle: 43°C
Load: upto 55°C
with the new Blackice
Idle: 33°C
Load 45°C
it gaves me 10°C less with the new big Radi
very nice i think
btw, i´m using 2x120mm adjustable Fans and they are running at lowest speed
maybe it can be some degrees colde if i pump up the speed
but with these settings i can´t hear the system, almost and that with good temps, i think
so what do u think about that all?
to be countined.....?
Participate on our website and join the conversation
You have already an account on our website? Use the link below to login.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
Anonymous
:P
vents in suck or blow mode
vents in suck or blow mode
Dark Biene
OP
blow
that´s why i used the alu to set it higher so there is a good airflow under the Radi
that´s why i used the alu to set it higher so there is a good airflow under the Radi
tobebana
OT: what was your dog's name? he's perfect lol
Dark Biene
OP
Dark Biene
OP
i just tried to let the vents run in suck mode
idle: ~39°
load: ~46°
hummm
idle: ~39°
load: ~46°
hummm
Anonymous
sure ... basically suck it better
but you got to see .... you got no air chamber ... the vents have no chance sucking air when the are next to an object
thats why the are louder and have less airflow
but you got to see .... you got no air chamber ... the vents have no chance sucking air when the are next to an object
thats why the are louder and have less airflow