Thanks to wonkanoby for the Info: are you're EIDE drives disappearing from the IDE RAID array or system after several days or weeks of error-free operation?
If the answer is yes? then Read On
Affected drives:
WD drives with capacities between 40GB & 120GB WD drives between 120GB and 200GB capacity with manufacturing date codes earlier than 3/25/03
The problem is a result of a feature that reduces idle acoustic noise in desktop drives. This feature may cause a timeout likely (though not exclusively) in an IDE RAID environment. To disable the feature, you can run a simple Western Digital utility to turn off a single bit in the drive?s run-time configuration. Disabling of this feature will NOT impact normal system operations. No firmware or hardware changes are required.
Download IDE Upgrade Utility
If the answer is yes? then Read On
Affected drives:
WD drives with capacities between 40GB & 120GB WD drives between 120GB and 200GB capacity with manufacturing date codes earlier than 3/25/03
The problem is a result of a feature that reduces idle acoustic noise in desktop drives. This feature may cause a timeout likely (though not exclusively) in an IDE RAID environment. To disable the feature, you can run a simple Western Digital utility to turn off a single bit in the drive?s run-time configuration. Disabling of this feature will NOT impact normal system operations. No firmware or hardware changes are required.
Download IDE Upgrade Utility
