IN WIN AURORA Addressable RGB PWM Case Fan Review

Published by

Tweaktown posted IN WIN AURORA Addressable RGB PWM Case Fan Review

A quote from the article:
It appears that one new set of RGB fans was not enough for In Win, as they have also released the Aurora RGB Fans at the same time as the Polaris RGB Fans. That being said, we are looking at a set of fans which can be controlled via motherboard RGB headers, albeit just ASUS and MSI motherboards at this time, or you can connect a hub and address the colors and patterns via software this time around. The fans are entirely different, but connectivity is similar, just with more parts to address now. If RGB fans with various modes and an additional pair of RGB LED strips are what you are looking for, you may want to look to In Win to help dress up your next build. The Aurora fans are to be sold much like the Polaris fans, where you need to initially buy the AURORAFAN-3PK in black and red or black and white, and then add onto it with the AURORA-1PK fans. The single-pack fans will not work fully without the 3-pack parts. These fans are 120mm in size, and only draw 0.84W at 0.5A per fan. The Aurora fans will spin in a range of 800 to 1400 RPM, but with software, there is a Turbo Mode, which pushes the fans to 2000 RPM. In normal situations, these fans will top out at 40.26 CFM and 1.50 mmH2) of pressure, but using Turbo Mode raises the CFM to 57.64 and 2.77 mmH2O, which is impressive. Although, in normal operation, the sleeve bearing fans will deliver 23.7 dB(A) into the room, in Turbo Mode, the noise level jumps to 39.2 dB(A). The Aurora fans are rated to spin for 36,000 hours, and are fully covered by a two-year warranty.
 IN WIN AURORA Addressable RGB PWM Case Fan Review @ TweakTown