Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Building a Stratum-1 GPS Based NTP Server with a Soekris net4501 Article
Posted by Philipp Esselbach, 05/12/2008 08:01 PM
EXTREME Overclocking has just posted an article on Building a Stratum-1 GPS Based NTP Server with a Soekris net4501.
>> Building a Stratum-1 GPS Based NTP Server with a Soekris net4501 Article
| Typical GPS based NTP server appliances sell for hundreds, even thousands of dollars. Most have lots of features that justify that cost, such as an ovenized crystal oscillator (or even a rubidium standard), additional frequency outputs, custom web interface, commercial support, etc. Building your own basic NTP server (like in this article) can be done on the cheap for well under $200, and for all practical purposes gives just as good time over a network. |
>> Building a Stratum-1 GPS Based NTP Server with a Soekris net4501 Article
comments powered by Disqus
Related Stories
02/20/2008 08:15 AM: Building an Affordable Skulltrail System by Philipp Esselbach
Techgage posted an article that takes a look at various ways to build a killer Skulltrail system for under $3,000...
12/07/2007 07:45 PM: Building a High End HTPC featuring the Thermaltake Media Lab by Philipp Esselbach
OCC has published an article about building a High End HTPC featuring the Thermaltake Media Lab...
12/01/2007 09:15 AM: Building a High End HTPC featuring the Thermaltake Mozart Enclosure by Philipp Esselbach
OCC has published a guide of building a High End HTPC featuring the Thermaltake Mozart Enclosure...
09/24/2007 12:30 PM: Building a Modular PSU by Philipp Esselbach
bit-tech published a guide on how to build a modular PSU...
Techgage posted an article that takes a look at various ways to build a killer Skulltrail system for under $3,000...
12/07/2007 07:45 PM: Building a High End HTPC featuring the Thermaltake Media Lab by Philipp Esselbach
OCC has published an article about building a High End HTPC featuring the Thermaltake Media Lab...
12/01/2007 09:15 AM: Building a High End HTPC featuring the Thermaltake Mozart Enclosure by Philipp Esselbach
OCC has published a guide of building a High End HTPC featuring the Thermaltake Mozart Enclosure...
09/24/2007 12:30 PM: Building a Modular PSU by Philipp Esselbach
bit-tech published a guide on how to build a modular PSU...