Android-x86 is a free, open source project that allows you to run Android on Windows. 64-Bit also available.An easy installer to install Android-x86 to a hard disk is included. The supported filesystems are ext3, ext2NTFS, and fat32.You can install Android-x86 to an NTFS filesystem to co-exist with Windows.To install:Burn the iso image to CDROM, or create a bootable USB disk (recommended).Boot from the Android-x86 installation CD/USB, choose the 'Install Android to hard disk.After seconds of booting, you will see a partition selection dialog. You can choose an existing partition to install Android-x86, or you can create or modify partitions by selecting 'Create/Modify partitions.' Note you can install Android-x86 to an external disk like USB drive. If the target drive is not shown, try 'Detect devices.'Android-x86 can co-exist with other operating system or data on the chosen partition. If the partition is formatted, you may select 'Do not format' to keep existing data. Otherwise, choose a filesystem type to format. Note the type you have chosen must match the partition id, or the bootloader will fail to boot.