I need driver of 3 Com U.S. Robotics 56K External Faxmodem for Windows 2000 Professional.

Whereever I search, I always found driver for win95/98 only not for Win2K !!!!!

Can anyone help for WIN2K ?

Thanks in advance.

Ramazan

is that an USB device ?
maybe it does not require any driver ?
in some cases Hardware man. did not make any 2k/xp driver since there is native support for it

Yeah it might be a plug and play device(which have native driver).

If not go to http://www.driverguide.com , i am very sure the site have the driver you want.

I use it. It is plug and play. Just turn it on, connect it and set it up in device manager.

99% of external modem's I've seen will work in Windows XP/2k without any extra drivers being installed.

However if you know the model number (should be on a sticker on the modem somewhere.) you can get the latest official drivers here:

http://www.usr.com/support/s-main-menu.asp

Thanks for your replies. I was away from computer for last 3 days, so I am just reading these now.

I will try your advices and then respond back.

Ramazan

Thanks for your help.

Windows did not detected it as a new hardware instead there is already "Standard Modem" installed.

So, I disabled auto detection and manually installed 3 Com US Robotics Modem. It is working fine. But, now there two modem installed on the same port COM1. (both standard & 3 Com US Robotics).

I deleted the Standard Modem entry and it is again there after the restart.

There is also an unknown PCI device in device manager which can not be installed.

I am using Dell Optiplex GX150 Computer with following devices:

External 3 Com US Robotics 56K FaxModem
HP Laser Jet 1150 Printer (Installed on LPT1 instead of USB Port)
External CD Writer (CREATIVE SB1394)

Just trying for solution, I have found that there is following port sharing conflict:

Standard Universal PCI to USB Host Controller PCI\VEN_8086&DEV_2442&SUBSYS_00000000&REV_02\3&29E81982&0&FA

Please guide me further.

Thanks
Ramazan

hmmm
you may start into safe mode ....
remove every modem outa there .... restart then let him detect modem ... enter yours if he does not automatically ....
now he may only have one ?