Extreme Overclocking w/ ASUS A8N SLI
Posted by: Newsfactory on: 01/06/2005 12:04 AM [ Print | 0 comment(s) ] · 2740 views
VR-Zone have thrown up their Extreme Overclocking Guide of 2 Geforce 6800 ultras in SLI mode on Asus's A8N SLI mainboard.
As I was overclocking on the Asus A8N SLI board, I had 58mm of space between graphics card 1 and graphics card 2. Therefore, I had to devise a cooler to fit in between this space factoring insulation, etc. Phase-change was the best bet for me so I went onto building the phase-change cooler for the card.
As I was anxious to get the benches rolling, I decided to go single-stage for one of the graphics card. The other GPU could be cooled by my existing GPU cascade cooler. I rushed out the GPU cooler in 2 days using the evenings after work.
For the evaporator of the GPU cooler, I decided to go with the simple and effective "cap-in-cap" design. I used a 6mm thick base with lots of copper caps for surface area and routing of refrigerant flow. The way I make my evaporators can be seen here.
Extreme Overclocking w/ ASUS A8N SLI
As I was overclocking on the Asus A8N SLI board, I had 58mm of space between graphics card 1 and graphics card 2. Therefore, I had to devise a cooler to fit in between this space factoring insulation, etc. Phase-change was the best bet for me so I went onto building the phase-change cooler for the card.
As I was anxious to get the benches rolling, I decided to go single-stage for one of the graphics card. The other GPU could be cooled by my existing GPU cascade cooler. I rushed out the GPU cooler in 2 days using the evenings after work.
For the evaporator of the GPU cooler, I decided to go with the simple and effective "cap-in-cap" design. I used a 6mm thick base with lots of copper caps for surface area and routing of refrigerant flow. The way I make my evaporators can be seen here.
Extreme Overclocking w/ ASUS A8N SLI
« Demo of Longhorn Avalon 3D @ Channel9 · Extreme Overclocking w/ ASUS A8N SLI
· Bill Gates 2005 CES Keynote at Las Vegas »
