ECS GF8200A Review
Posted by: Philipp Esselbach on: 08/20/2008 10:01 AM [ Print | 0 comment(s) ] · 1194 views
OCC has published a new review on the ECS GF8200A
A quote from the article:
>> ECS GF8200A Review
A quote from the article:
| On this ECS board, I did not get very far with my attempts at overclocking. I attribute this to the board only having a 4-pin CPU power connector and a four phase voltage regulator setup. I could not get enough clean power through the board to sustain a stable overclock. I did get the ECS GF8200A up to 2.94GHz by bumping the CPU frequency up to 210MHz from the stock 200MHz, and upping the CPU multiplier to 14x. However, to do this, I had to push the CPU voltage up to 1.55v, which is, in my opinion, the highest I would ever like to see the vCore of a CPU. With everything stable at 2.94GHz, that's where the overclocking benchmarks will be run. |
>> ECS GF8200A Review
Related Stories
07/17/2008 05:01 PM: ECS GF8200A Black Series GeForce 8200 Motherboard Review by Philipp Esselbach
Bigbruin.com has posted a review on the ECS GF8200A Black Series GeForce 8200 Motherboard...
07/10/2008 09:01 AM: ECS GF8200A Black Series Motherboard Review by Philipp Esselbach
Hardware Secrets posted ECS GF8200A Black Series Motherboard Review...
07/07/2008 07:40 PM: ECS GF8200A Black & ASRock K10N78FullHD-hSLI Review by Philipp Esselbach
Phoronix takes a look at the ECS GF8200A Black & ASRock K10N78FullHD-hSLI running under Linux...
05/06/2008 11:01 AM: ECS GF8200A Black edition mainboard review by Philipp Esselbach
The Guru of 3D posted a review on the ECS GF8200A black edition mainboard ...
Bigbruin.com has posted a review on the ECS GF8200A Black Series GeForce 8200 Motherboard...
07/10/2008 09:01 AM: ECS GF8200A Black Series Motherboard Review by Philipp Esselbach
Hardware Secrets posted ECS GF8200A Black Series Motherboard Review...
07/07/2008 07:40 PM: ECS GF8200A Black & ASRock K10N78FullHD-hSLI Review by Philipp Esselbach
Phoronix takes a look at the ECS GF8200A Black & ASRock K10N78FullHD-hSLI running under Linux...
05/06/2008 11:01 AM: ECS GF8200A Black edition mainboard review by Philipp Esselbach
The Guru of 3D posted a review on the ECS GF8200A black edition mainboard ...
« ATEN CS1782 Dual Link DVI KVM Switch Review · ECS GF8200A Review
· ATi Radeon HD 4870 X2 Review »
